Epoxy Floor Coatings

A professionally installed epoxy floor typically lasts 10 to 20 years depending on traffic, usage, and maintenance. Commercial and industrial floors with heavy equipment may require a topcoat refresh after 5–7 years.

In most cases, no. Epoxy requires direct contact with a properly prepared concrete substrate to bond correctly. Existing flooring usually needs to be removed before installation.

Light foot traffic is typically allowed after 24 hours. Full cure — including vehicle traffic and heavy loads — takes between 48 and 72 hours depending on the system and temperature conditions.

A standard high-gloss epoxy can be slippery when wet. For wet areas, kitchens, or safety-sensitive environments, we apply a quartz broadcast or anti-slip additive to the topcoat, which significantly increases traction.

No. Minor cracks and surface imperfections can be repaired as part of the preparation process. However, active moisture issues or structural cracks need to be addressed before coating.

Yes, but it requires coordination. The area being coated must be clear of furniture and foot traffic during application and curing. We can work in phases to minimize disruption in commercial or multifamily settings.

Epoxy is one of the easiest floors to maintain — sweep or vacuum regularly and mop with a mild cleaner. Avoid harsh chemicals or abrasive scrubbers. A periodic topcoat refresh every few years keeps it looking new.

Yes. We stand behind our work with a workmanship warranty. Coverage details depend on the system selected and the specific conditions of the project — we'll outline this clearly in your estimate.